D06F (Diaphragm Type)

D06F is a standard pattern Diaphragm-actuated with balanced seat design PRV. It has Brass housing and high quality synthetic material adjusting knob with a set pressure indicator. Comes with clear synthetic filter bowl and consists of NBR diaphragm & seals. Also contains SS integral Fine Filter with 0.16mm mesh.D06F is an INSREVICE valve i.e. servicing and maintenance of this valve without removal from pipework. It is lightweight and has lower noise levels

SPECIFICATIONS:

Connection Sizes : DN15 – DN50 (1/2” – 2”)

Max Inlet Pressure : 16 bar

Outlet Pressure : 1.5 bar – 6 bar

Nominal Pressure : PN16

Min. Pressure drop : 1 bar

D15S (Diaphragm Type)

D15S is a Diaphragm-actuated with cartridge insert PRV. The housing and spring bonet is made of Ductile Cast Iron coated with PA (Polyamide) and consists of a patented SS cartridge solution for easy assembly and maintenance. The diaphragm and seals are made up of EPDM. The adjustment spring is not in contact with the water. Also the valve comes with inlet and outlet pressure gauges. D15S is DVGW, WRAS, KIWA and SVGW approved.

SPECIFICATIONS:

Connection Sizes : DN65 – DN200 (2.5” – 8”)

Max Inlet Pressure : 16 bar

Outlet Pressure : DN50 – 100: 1.5 bar – 7.5 bar DN150 – 200: 1.5 bar – 8 bar

Nominal Pressure : PN16

Min. Pressure drop : 1 bar

D19 (Piston Type)

D19 is a standard pattern Piston Type PRV. It is made of Forged Brass. Has an adjustable outlet pressure with adjusting screw. The adjustment spring is not in contact with the drinking water. With Compact construction.

SPECIFICATIONS:

Connection Sizes : DN15 – DN50 (1/2” – 2”)

Max Inlet Pressure : 16 bar

Outlet Pressure : 1 – 5.5 bar

Nominal Pressure : PN16

Min. Pressure drop : 1 bar

Manual Ball Valve

Manual Ball valves are made up of Forged Brass with Chrome plated brass ball and comes in full port design.

SPECIFICATIONS:

Connection Sizes  :  DN15 – DN65 (1/2” – 2.5”)

Nominal Pressure  :  PN16

Manual Butterfly Valve

Manual Butterfly valves have 90 deg opening/closing position which can be executed using a hand lever or a gear box mechanism. They have a Cast Iron body, powder coated with an epoxy coated Ductile Iron disc. The disc is also available in Stainless Steel. The valve comes with wafer type connection.

SPECIFICATIONS:

Connection Sizes  :  DN50 – DN600 (2” – 24”)

Nominal Pressure  :  PN16 & PN25

Liner Material  :  EPDM

Motorized Butterfly Valve

Motorized Butterfly valve is an actuator fitted butterfly valve. The body is made up of powder coated Cast Iron with an epoxy coated Ductile Iron disc and is also available in Stainless Steel disc. The actuator is an On/Off type, modulating control valve and comes with an enclosure of IP66/67. The actuator comes with a space heating arrangement and is a non-clutch type design. The actuator is made up of dry powder coated Aluminium Alloy and come with a space heater arrangement.

VALVE SPECIFICATIONS:

Connection Sizes  :  DN50 – DN500 (2” – 20”)

Nominal Pressure  :  PN16 & PN25

Liner Material  :  EPDM

ACTUATOR SPECIFICATIONS:

Power Supply  :  220Vac, 50/60 Hz

Running Time  :  18 – 90 sec (depending on valve size)

Angle  :  90° ± 5°

Dual Plate Check Valve

Dual Plate Check Valves is designed for purpose of non-return valve that is stronger, lighter in weight and smaller in size as compared to other Check valve. Dual Plate Check Valve comes with a cast Iron body with a lapped Ductile Iron disc. It comes with wafer type connection.

SPECIFICATIONS:

Connection Sizes  :  DN50 – DN200 (2” –8”)

Nominal Pressure  :  PN16 & PN25

Seal Material  :  EPDM

Y Strainer

Y-type strainer is widely used in water application and is used for protecting valve and other equipment from scrap and impurities in the system. It has a Ductile Iron body with Stainless Steel filter screen. Y Strainer comes in both screwed and flanged type connection.

SPECIFICATIONS:

Connection Sizes  :  DN20 – DN200 (3/4” –8”)

Nominal Pressure  :  PN16

Automatic Air Vent

Air Vent is an automatic venting device and is suitable for venting of air or gas from the installations. The Air Vent Comes with Brass housing and a high grade, heat-resistant synthetic material floats.

SPECIFICATIONS:

Connection Sizes  :  DN15 (1/2”)

Nominal Pressure  :  PN10